Start with the two-in-one build
The Laser Synthesizer is a stand-alone Hack Pack robot that combines a touchpad synthesizer with a Bluetooth-enabled speaker and a laser visualizer. That means your projects can explore three layers at once: the notes you play, the sound you stream, and the light show that reacts to what you create. Because it comes with everything you need and requires no subscription, you can start experimenting as soon as the build is complete.
Before you plan any sound experiments, confirm the kit is available in your region. The catalog currently lists it as available in the US only. If you are outside the US, check availability before ordering.
What the Laser Synthesizer includes
- Laser Synthesizer - Speaker: Two-in-one build connects a touchpad synthesizer to a Bluetooth-enabled speaker with a laser visualizer. This is the core hardware for every project below, so knowing the three parts helps you plan sound and light experiments.

Laser Synthesizer - Speaker - Laser Synthesizer - Speaker: Comes with everything you need and requires no subscription. You can build and start experimenting without buying extra parts or signing up for a service.
- Laser Synthesizer - Speaker: Learn to code with the Coding Console (IDE). If you want to go beyond touchpad play, the Coding Console is the supplied tool for coding your own sound behaviors.
Project 1: Build a touchpad melody machine
The touchpad synthesizer is the most direct way to generate sounds. Use this sequence to turn it into a repeatable melody machine.
- Build the kit completely: Follow the supplied build instructions and confirm the touchpad, speaker, and laser visualizer are connected as described. The catalog does not list separate operating steps, so rely on the included build guide.
- Power on and test each touch zone: Touch each area of the pad and listen for a distinct sound. This gives you a map of which zones you can use for different notes or effects.
- Record a short sequence: Play a simple pattern of touches and repeat it until it feels consistent. The goal is a loop you can recreate, not a perfect performance.
- Add the laser visualizer: Watch how the laser pattern responds as you play. Use that visual feedback to adjust your touch timing or intensity.
Project 2: Stream Bluetooth audio and watch the laser react
The Bluetooth-enabled speaker lets you play music or sound effects from a phone or tablet. Pair your device according to the speaker's instructions, then play a track and observe the laser visualizer. This is a low-prep way to explore how different frequencies and volumes change the light show.
Keep in mind that the catalog does not specify Bluetooth range, pairing steps, or whether the visualizer responds to all audio sources. Treat those details as things to discover through safe experimentation rather than confirmed features. If pairing does not work immediately, move the source device closer and retry before assuming a fault.
Project 3: Code a sound experiment with the Coding Console
The Coding Console (IDE) is included so you can learn to code. Use it to make the synthesizer behave in new ways. The catalog does not list specific coding projects, so start with small, observable changes.
- Change how a touch responds: Write a simple program that makes one touch zone produce a different sound or pattern than another. Test it by touching each zone in turn.
- Create a repeating pattern: Use a loop in your code to repeat a short sequence of sounds. This turns the synthesizer into a simple sequencer.
- Tie sound to the laser visualizer: If the Coding Console exposes control of the visualizer, try linking a sound trigger to a laser change. If it does not, keep the experiment focused on sound only.
Matching the project to your goal
Different projects suit different builders. Use this comparison to pick a starting point.
- Touchpad melody machine: Best for immediate, hands-on play with no coding. Requires only the completed build and a sense of rhythm.
- Bluetooth audio + laser visuals: Best for exploring the speaker and visualizer together. Requires a phone or tablet and a track to play.
- Coding Console experiment: Best for builders ready to write simple programs. Requires comfort with the IDE and a willingness to test small changes.
Troubleshooting when sound or light misbehaves
The catalog does not supply a troubleshooting guide, so use a process of elimination. First, confirm the build matches the instructions and all connections are secure. Second, test the touchpad and speaker separately: if touchpad sounds work but Bluetooth does not, focus on pairing; if neither works, check power and connections. Third, simplify: disconnect Bluetooth and test the touchpad alone, then reconnect and test again.
If the laser visualizer does not appear, verify that the kit is powered and that the visualizer is enabled in your build. The catalog does not confirm whether the visualizer can be turned off independently, so avoid assuming a setting exists. When in doubt, rebuild the relevant section slowly and retest.
Safety and setup notes before you start
- Laser safety: The kit includes a laser visualizer. Do not point the laser at eyes or look directly into the beam. Follow any safety instructions included with the kit.
- Regional availability: The Laser Synthesizer is currently available in the US only. Confirm shipping eligibility before ordering.
- No subscription: The stand-alone kit requires no subscription, so all projects above use only what comes in the box plus a Bluetooth source device for streaming.

